Storage of personal  items

To prevent staff from bringing personal items (e.g. keys, mobile phones or coins) into production and storage areas, where they could contaminate products (e.g. as foreign bodies), there must be sufficient and suitably secure storage for employees’ belongings. Consideration should be given to the storage of bulky items such as motorbike leathers and helmets, as well as items such as jewellery and food.

Storage areas should be designed to facilitate good practice and cleaning (e.g. lockers with sloping tops to prevent the accumulation of rubbish and raised off the floor to facilitate cleaning).

Direct deliveries to the end user or traders business address included in the rrp pricing. Deliveries to commercial premises only, does not include deliveries to private addresses. Deliveries is kerbside, nearest point of entry to the premises. Any delivery restrictions, e.g. size of vehicle, height and weight should be noted at time of order. Redelivery charges will apply for a failed delivery. Specific day deliveries can be arranged for full vehicle loads only, extra charges may apply.

100% manufactured in the UK. Steel sourced from UK steel stockholders. Locker components e.g. locks sourced outside of the UK.

Lockers manufactured with an air-flow venting system built in the top and bottom locker plinth.

Cloakroom island seating is supplied flat packed and will require assembly on site. Freestanding benches supplied assembled. Cloakroom lockers require assembly.

Various products contain a mix of steel finishes and component thicknesses, the icon indicates the range of steel thicknesses used in the product.

Segregation of personal items from work clothing

Separate storage facilities for personal items and work clothing are necessary to prevent cross- contamination of clothing via the locker. This is often achieved  by:

  • using a locker with a divider to separate work clothing from personal clothing
  • enclosing protective clothing in a bag, such as a laundry bag, before use
  • providing a separate area for hanging of work clothing.

Due to the potential for cross-contamination, clean protective clothing must be segregated from dirty protective clothing (e.g. through the provision of separate locker areas or a dedicated collection point for dirty laundry).

Components of products that feature an epoxy powder coated paint finish will incorporate an anti-bacterial additive which is 99.9% effective against E.coli, MRSA and moulds for the life of the product. These products are ideally suited for use in the healthcare, food, pharmaceutical industries and in areas where hygiene is important.

Locker/cupboard test sample componants complied with the requirements for BS ‘Class 0’ surface, as defined in paragraph A13 (b) of approved document B, ‘Fire Safety’, to the building regulations 2000. The result of the tests to BS 476: Part 6:1989+A1: 2009 and BS 476: part 7: 1997, demonstrate that the products, as tested, complies with the requirements for ‘Class 0’.

FSC is an international, non-governmental organisation dedicated to promoting responsible management of the world’s forests. FSC is the only wood certification scheme endorsed by the major environmental charities, including WWF, Greenpeace and The Woodland Trust.

Tray storage cupboards will require the trays and runners to be loaded into the cupboard. Instruction guide will be included within the product packaging. The trays and runners are delivered separately from the cupboard.